| | Tell A Friend E-mail addresses are not recorded | |
|
|
|
TYC Cabin Air Filter for INFINITI EX35 (2008), G35 Sedan (2007-2008), M35/M45 (2006-2008) | 
 enlarge
| Brand: TYC
Category: Automotive Parts And Accessories
List Price: $32.05
Buy New: $16.99
You Save: $15.06 (47%)
Rating:  1 reviews
Shipping Weight (lbs): 0.2
Dimensions (in): 9.5 x 8.3 x 1.4
MPN: A8091P
ASIN: B00162GGOK
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
| |
| Features:
| • | TYC Cabin Air Filter protects passengers by eliminating nearly 100% of exhaust pollutants entering the interior of the vehicle | | • | Excellent filter performance (dust loading capacity and pressure drop) that meets or exceeds the Original Equipment | | • | Easy do-it-yourself installation! (Installation instructions are included) | | • | This kit contains a single Particulate cabin air filter you need to replace your existing filter |
|
| Editorial Reviews:
Product Description
All TYC cabin air filters are manufactured with superior material and processes, with workmanship and performance backed by a comprehensive product warranty. The filters come in two types: Particulate and Carbon. The type of TYC cabin air filter you receive for your car will based on the type that is chosen by the Original Equipment for optimum performance (dust loading capacity and pressure drop). All TYC cabin air filters have the quality and filter performance (dust loading capacity and pressure drop) that is comparable to or exceeding the Original Equipment. These high quality cabin air filters enable peak operating efficiency of the vehicle heating & air conditioning system and provides clean air by trapping airborne allergens, pollen, mold spores, and dust that aggravate respiratory problems; Typical filter removes 2-12 grams of particulate matter during its service life and replacement is recommended every 12 months or 12,000 miles.
|
| Customer Reviews:
AC Filter Installation July 18, 2008
M. D. Noble (FL, USA)
1 out of 1 found this review helpful
Filter appears to be an exact match. Time will tell how well it actually filters. Installation instructions were not very good. See my experience that follows.
Cabin (Air-Conditioning) air filter installation for '07 Infiniti M35.
The instructions I received with the replacement filter were not very useful. After searching the web and piecing together other people's input, I was able to complete the task, but it was still a learning experience.
First, you need to remove the glove box: Open the glove box. There are three hinge points at the bottom of the box (left, center and right). There are "tabs" on the box that slide into these "holders". Gently pull up and out on the left side of the glove box. The tab should pop out. Repeat for the center point. This should allow the left side stop pin to clear the dash slot. Repeat for the right side. You should now be able to turn the box, pull it from the dash and let it hang from the retaining cord on the right side. Note the hinge slots and tabs for reference for re-installation later.
Second, remove the black access door behind the glove box: This is an "L" shaped cover with three hinge points at the bottom and three tabs at the top. Gently push back on the tabs at the top to un-lock, rotate down on the hinge points and pull out. Behind this you will see a white plastic door which covers and holds the filter in place.
Third, remove white access door as follows or you will break the retaining tabs off! On the right side is a locking tab, gently press in and pull the right side of the tab toward you to unlock the tab BUT STOP AS SOON AS THE TAB UNLOCKS THE DOOR AND OPENS ABOUT " or the tabs on the left side will break off, they are not hinged! Next, slide the door to the right to clear the tabs on the left side and remove. Note the position and orientation of the filter inside. Remove the old filter.
Fourth, install the new filter: Make sure the orientation and air flow direction are as marked and match previous filter. Mine was pointing "up", with the rigid side plate facing out. The new filter will be sitting on top of the fan, when the white door is re-installed, it has "fingers" that lift the filter into the proper location, but you may find it easier to lift the filter up with one hand and slide the door back into position with the other hand. That said, lift the filter, slide the tabs on the left side of the door back into there slots. Push the door back into original position and latch the right side locking tab. Make sure the door is sealed and back to original position and latch tab on the right is locked.
Now, reverse the previous steps to complete the task. Re-install the black access door cover. Lift up the glove box and turn to install right side stop pin into dash slot position, rotate left side into position and center box in dash opening. You will have to move the box up/down, in/out a bit to "feel" the hinge tabs properly engage the hinge slots. Once the tabs are in the slots you can push down on each side and it will pop back in place. (If you have difficulty, you may want to remove the under dash cover below the glove box. There are three tabs in the front that slide into three slots and one tab and slot in the rear. This can be removed by pulling down on the front of the panel at each side and the middle, then slide it forward out of the rear slot. Disconnect the light if required by pushing the latch on the plug and pulling it off. Feel around the hinge locations to guide the parts together).
Check operation of the glove box door. Done.
|
|
|
|
Copyright 2006,07 All Rights Reserved. | | Alexa Ranking |
|
|
|
|
